Flush Mounting Kit for Shuffle Tech Card Shuffler
Shuffle Tech. Fully automatic card shuffler ST-1000 with flush mount kit installed in table, aerial view
Shuffle Tech fully automatic card shuffler ST-1000 with flush mount kit installed in table, side view
Shuffle Tech ST-FMK Flush Mount Kit Components
Flush Mounting Kit for Shuffle Tech Card Shuffler Shuffle Tech. Fully automatic card shuffler ST-1000 with flush mount kit installed in table, aerial view Shuffle Tech fully automatic card shuffler ST-1000 with flush mount kit installed in table, side view Shuffle Tech ST-FMK Flush Mount Kit Components
Flush Mounting Kit for Shuffle Tech Card Shuffler
Flush Mounting Kit for Shuffle Tech Card Shuffler Shuffle Tech. Fully automatic card shuffler ST-1000 with flush mount kit installed in table, aerial view Shuffle Tech fully automatic card shuffler ST-1000 with flush mount kit installed in table, side view Shuffle Tech ST-FMK Flush Mount Kit Components
0% OFF

Unterputzmontageset für den Kartenmischer von Shuffle Tech

$149
Product SKU: ST-FMK

Überblick

Das Mischen von Karten mit einem Kartenmischer ist großartig, aber mit diesem Unterputz-Montagesatz ist es noch besser! Dieser mit dem Kartenmischer von Shuffle Tech kompatible Montagesatz lässt sich einfach an Ihrem Pokertisch anbringen und beliebig oft montieren und demontieren.

Mit dem Unterputzmontagesatz werden die Karten aus dem oberen Fach statt aus dem seitlichen Präsentationsfach ausgeworfen, was das Aufnehmen einfacher und bequemer macht. Mit einem einfachen Schalter an der Unterseite des Geräts können Sie außerdem vom Tischmodus in den Unterputzmodus wechseln.

Abmessungen: 10 3/8" x 8 1/8"

  • Der Versand erfolgt 1–2 Werktage nach Ihrer Bestellung.

Product FAQ's

The Flush Mounting Kit is an accessory designed to integrate the Shuffle Tech ST-1000 card shuffler directly into your poker table surface rather than leaving it sitting on top of the felt. It includes a faceplate, support base, mounting hardware, an installation template, and printed instructions so everything you need arrives in one box. The result is a clean, professional look where cards are delivered from below the table through a top-tray output.

This kit is purpose-built exclusively for the Shuffle Tech ST-1000 card shuffler. The tolerances are designed specifically for that model, which means no shimming, no wobble, and no improvised fixes. It will not fit other shuffler brands or models, so confirm you own an ST-1000 before ordering.

The kit requires a table cutout that accommodates outer dimensions of 10 and 3/8 inches by 8 and 1/8 inches. Confirming these measurements against your table before cutting is essential to avoid an expensive mistake, especially on a custom-built surface. The installation template included in the kit helps guide accurate marking and cutting.

A professional carpenter or table builder is strongly recommended for the installation because the process requires cutting a precise opening in your table surface. An accurate cut ensures the faceplate sits flush and the overall finish looks intentional rather than improvised. If you are not confident with woodworking, outsourcing this step protects both your table and the shuffler.

Yes, a physical toggle switch located on the underside of the ST-1000 shuffler body lets you convert between flush-mount and tabletop operation without any tools or reconfiguration. There is no rewiring involved and no guesswork about which setting you are using. This makes transitioning between modes straightforward and quick.

When the shuffler is installed in flush-mount position, the ST-1000 switches to top-tray output, delivering cards upward through the table surface directly to the dealer. This keeps the deal path short and natural, reducing the dealer's hand movement and eliminating the mechanical clutter visible in tabletop mode. The shuffle cycle itself stays quiet and out of sight, keeping the game moving without distracting theatrics.

Yes, the flush mounting kit is fully removable and reinstallable, so you are not permanently committed to a single table configuration. If you reconfigure your layout, move the table, or decide to sell it, the shuffler and kit can be removed without destroying the table. This reversibility protects your investment over the long term.

The kit includes a faceplate, a support base, mounting hardware, an installation template, and printed instructions. Everything required for a complete and finished installation is in the box, so you will not need to source additional parts separately. The model number for this kit is ST-FMK, which confirms you are ordering the correct Shuffle Tech accessory.

The kit is designed for serious home game hosts, poker table builders, and card room operators who want a clean, integrated look for their shuffler. If you own an ST-1000 and are building or upgrading a dedicated poker table, this kit is the purpose-built solution for achieving a factory-fitted appearance. It is not intended for casual setups or tables that are not dedicated poker surfaces.

Yes, the Flush Mounting Kit is an accessory only and does not include the Shuffle Tech ST-1000 card shuffler itself. You must already own or separately purchase the ST-1000 to use this kit. Make sure you have the correct shuffler model before ordering, since the kit is not compatible with any other shuffler.

No, because the kit is purpose-built to the exact tolerances of the ST-1000, there is no need for shimming or any improvised fixes to stabilize the unit. A properly cut opening following the included installation template combined with the support base and mounting hardware creates a secure, wobble-free fit. The precision fit is one of the key advantages of using a model-specific kit over a generic alternative.

The model number is ST-FMK, which is the identifier you should use to confirm you are ordering the correct Shuffle Tech accessory and not a generic or incompatible alternative. Using this model number when purchasing ensures the kit you receive is designed specifically for the ST-1000. Always reference ST-FMK when reordering or verifying compatibility with a retailer.